OEM High Quality Power Meter For Fiber Optic Factories - Active and Reactive Frequency Table (Regular) – Newlink
OEM High Quality Power Meter For Fiber Optic Factories - Active and Reactive Frequency Table (Regular) – Newlink Detail:
Smart Frequency Meter Instruction Manual
Product Features
1. The whole four-digit display
2. Optional with communication function, communication address, baud rate
3. Software adjustment, no internal potentiometer, high precision
4. Software adjustment, no internal potentiometer, high precision
Matters needing attention
1. Before use, the meter needs to be powered on for 15 minutes.
2. Pay attention to prevent vibration and impact, and do not use it in places with excess dust and excess harmful gases.
3. The input wire should not be too long. If the input end of the signal under test is long, please use a twisted pair shielded wire.
4. If the signal is accompanied by high frequency interference, a low frequency filter should be used in the line.
5. When not in use for a long time, please turn on the power for no less than 4 hours every three months.
6. Long-term storage should avoid direct light, and should be stored at -10℃~70℃.
7. If there is no display on the meter, first check the auxiliary power supply to see if the voltage is within the specified range.
8. If the display is abnormal, check whether the input signal is normal and whether the signal terminals are tightened.
9. Unless the PT has enough power, the PT signal cannot be used as an auxiliary power supply at the same time to ensure the normal operation of the instrument.
10. The screws of the current terminals in the CT circuit must be tightened to ensure reliable contact between the incoming and outgoing wires to avoid malfunctions.
Overview
Product In Kind
External Dimensions
Product detail pictures:
Related Product Guide:
Our company since its inception, always regards product quality as enterprise life, continuously improve production technology, improve product quality and continuously strengthen enterprise total quality management, in strict accordance with the national standard ISO 9001:2000 for OEM High Quality Power Meter For Fiber Optic Factories - Active and Reactive Frequency Table (Regular) – Newlink , The product will supply to all over the world, such as: Juventus, New Delhi, Spain, We are fully aware of our customer's needs. We provide high quality products, competitive prices and the first class service. We would like to establish good business relationships as well as friendship with you in the near future.
By Christian from Greece - 2017.03.28 12:22
Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
By Jason from Cambodia - 2018.05.13 17:00
Related products
-
ODM Ac And Dc Voltmeter Supplier - Single-Phas...
Overview The single-phase multi-function meter can measure all the commonly used power parameters in the power grid system with high precision: single-phase voltage, single-phase current, active power, reactive power, power factor, grid frequency, active energy, reactive energy, and with communication Interface and energy pulse output function. Adopt MODBUS-RTU communication protocol to realize LED/LCD on-site display and remote RS-485 digital communication. It has the characteristics of conv...
-
OEM High Quality Analog Micro Amp Meter Factori...
Overview Using AC voltage technology, it is possible to measure the three voltage phases in the power grid, and simply compare them through the panel setting rate. Features, and can complete the network communication with similar PLC and industrial computer. Features Measurement: Three-phase voltage Display: Three rows of LED digital / LCD liquid crystal display A, B, C three-phase voltage Uses: suitable for power grid, automatic control system. Low-voltage three-phase current measurement cir...
-
ODM Dc Volt Amp Meter Factories - Active and R...
Intelligent digital display Power Meter Instruction Manual Overview This series of intelligent digital display power meter is a high-precision meter developed for power measurement and display in power grid and automatic control system. It has the advantages of intuitive display, high precision, good stability and strong vibration resistance. CPU digital processing, AC true RMS measurement, CT (PT) can be set through the panel keys. Optional: 1 relay control output, can be set to: upper limit...
-
OEM High Quality Ammeter For Ac Current Manufac...
ltem/Model (Emerald Backlight) (white backight optional negative display white characters) Shape Working power DC5V±5%≤15mA AC/DC9V-12V AC/DC24V DC5V±5%≤15mA AC/DC9V-12V AC/DC24V Dimensions (WwH’Dmm) 79×42.5×25.5 79×42.5×25.5 Mounting hole(mm) 75×39.5 75×39.5 Measurement accuracy ±0.2% of full scale value ±2 words(DC) +0.5% full scale value ±5 words (AC) ±0.2% of full scale value +2 words(DC) ±0.5% full scale value 15 words(AC) Basic rangeo DC voltage (direct inpu...
-
OEM High Quality Secondary Overvoltage Protecto...
Application
-
OEM High Quality Inductive Ammeter Dc Supplier ...
Overview Using AC voltage technology, it is possible to measure the three voltage phases in the power grid, and simply compare them through the panel setting rate. Features, and can complete the network communication with similar PLC and industrial computer. Features Measurement: Three-phase voltage Display: Three rows of LED digital / LCD liquid crystal display A, B, C three-phase voltage Uses: suitable for power grid, automatic control system. Low-voltage three-phase current measurement cir...
